How to solve the film deviation of vertical automatic packaging machine?

  • By:Soonkpack
  • 2024-06-03
  • 93

The vertical automatic packaging machine is a type of packaging machinery and equipment. The vertical automatic packaging machine is a standing type as the name implies. It is characterized by a small footprint. The packaging bags are produced by the machine at the same time during the working process, so the vertical automatic packaging machine is Automatic packaging machines need to be combined with packaging film rolls to work properly.

Therefore, when we purchase a vertical automatic packaging machine, we need to purchase Packaging roll film (Packaging roll film can be consulted with us here to learn about the ordering steps, or you can find relevant suppliers to produce them yourself).

In the process of using vertical automatic packaging machine after purchase, if the merchant did not adjust it properly before leaving the factory, or made an operation error during the operation, or when replacing the new roll film, the vertical automatic packaging machine may be caused by not knowing how to operate it. The machine-drawn film goes astray. If you encounter a vertical automatic packaging machine that pulls the film off track, how should you solve this problem?

Today soonkpack joyce will provide you with detailed solution steps on how to solve the problem of film deviation in vertical automatic packaging machines.

First, let’s show the deviation and normal comparison of the bags packaged by our packaging machine.

Comparison picture of packaging machine packaging bag deviation and normal bag

Follow the steps to start adjusting the vertical automatic packaging machine

After purchasing the vertical automatic packaging machine, after the packaging film is installed according to the schematic diagram, we need to start the vertical automatic packaging machine to test the packaging bag. After the packaging film is made, if the left side of the back seal on the back of the packaging bag appears as shown below The bag edge (red line) is shorter (not aligned) than the bag edge on the right (blue line).

packing-machine-The-right-edge-is-long

Knowing the problems given above, we next adjust the former (bag forming machine) of the vertical automatic packaging machine according to the deviation of the packaging film of the vertical automatic packaging machine.

Under normal circumstances, the left and right edges of the packaging film on the former (bag forming machine) are evenly aligned (as shown in the picture above). If the back seal is asymmetrical, the steps we need to take are

Use a screwdriver to loosen the screws in Figures 1 and 2 below. After loosening, if the right edge of the back sealing edge is more than the left edge, tap the H-shaped stainless steel plate 3 to the left with a wrench (arrow in the figure below) , move the H-shaped stainless steel plate to the left, a little bit. After the movement is completed, tighten the two screws numbered 1 and 2. If there are more back seals on the left than on the right, then the H-shaped stainless steel plate will be knocked to the right (move to the right)

After the above steps are completed, turn on the machine and test to see if the bag is adjusted properly. If the back sealing edge of the bag has not been adjusted, continue to follow this step to deal with the deviation of the packaging film of the vertical automatic packaging machine. Adjust the back seal of the bag to overlap.

When adjusting and handling the deviation of the packaging film of the vertical automatic packaging machine, be careful to wear gloves to avoid accidentally touching the horizontal and vertical seals during adjustment, which may cause burns.

  After the detailed introduction by Soonkpack Joyce, I believe everyone has a detailed solution to the problem of how to solve the problem of packaging film deviation in vertical automatic packaging machines.

Soonkpack has been focusing on manufacturing automatic packaging machinery and non-standard packaging machines for 16 years. If you need to know more about the packaging solutions and quotations of automatic packaging machines, please contact us.

  You may be interested in:

How to adjust the cursor of automatic packing machine

granule packaging machine

powder packaging machine

liquid packaging machine 

fully automatic packaging machine line



CONTACT US

contact-email
contact-logo

Foshan Soonk Packaging Machine Co., Ltd.

We are always providing our customers with reliable products and considerate services.

    If you would like to keep touch with us directly, please go to contact us

    INQUIRY

      INQUIRY

        Online Service